店铺综合评价:
Use the following steps to select a product for the circuit to be protected:
(1) Choose the appropriate product construction type based on PCB Design Considerations : Dip type or SMD type or others.
(2) Choose a voltage rating: a PPTC device should be chosen with a voltage rating that equals or exceeds the source voltage in a particular circuit. Also, the expected fault voltage should not be greater than the PPTC voltage rating. For instance 72/30 series.
(3) Using the IHold vs.Temperature Table on the product family data sheet, select the polymeric device at the maximum operating temperature with an IHold greater than or equal to the normal operating current.
(4) ording to the circuit's Operating Current, Operating Voltage and Maximum Ambient Temperature refer to resettable fuse's Electrical Characteristics table and Thermal derating Curve to select an appropriate product (series and part num ber).
PRODUCT SELECTION GUIDE
plete the sheet below based on circuit design, and you will find the model you need: Form: DIP SMDMaximum operating current & voltage: V Normal o p erating current & voltage: V Maximum Ambient Temperature / Derating Typical fault current A Minimum current in the circuit: A Required response time at fault: S2. choose the model you need:
PTC type
Vmax
Ih
Applications
PTC model
AC/DC6V
75mA -3.0A
V Motor/ safety lamp/main board IC,USB/1394link
SN6-XXX
AC/DC16V
2.0A -14.0A
otorcar safeguard/automobile wire harnesses /high/low frequency power/transformer/ electric toy / electric massage chair
SN16-XXX
AC/DC30V
0.7A -9.0A
House cinema/ loudhailer /divider/ ISM LOAD /motor/cleaner/High/low frequency recharger/ electric toy
SN30-XXX
AC/DC72V
0.050A -3.75A
NB Satellite video receivers /DCD/vehicle’ CD/LCD monitor/ Switching Power Supplie s /POS equipment/ loudspeaker
SN72-XXX
AC/DC90V
0.15A -0.90A
lectronic ballast / Halogen Bulb / fluorescent lamp / Healthcare reading lamp/ ic Ballasts
SN90-XXX
AC/DC250V
0.050A -1.0A
ADSL/XDSL sound separator/exchanger/Patching p rimary protection/POS equipment /prepay ammeter /water meter/HV motor
SN250-XXX
SMD贴片式
AC/DC6-60V
0.10A-2.60A
High density PCB circuit/IE1394/ link/USBCPU/hard disk driver circuit/gateway router/DVD/ exchanger
SMD1812-XXX
0.125A-.50A
SMD1206-XXX
0.05A-1.50A
SMD1210-XXX
过流保护片式
DC12-24V
0.70A -9.0A
echargeable battery NiMH/NiCD/Li battery
PTCXXX-A/B
AI 自动插件编带式
AC/DC06-50V
0.10A-.75A
AI mounting machine
SN-AI-XXX
Hold current—maximum current at which the device will not trip under specified conditions at 25 ° C unless otherwise specified.
The highest voltage that can safely be dropped across a Poly Switch device continuously in its tripped state under specified fault conditions.
It
Minimum current at which a device will trip under specified conditions.
Vmaxi
Typical power dissipated from device when in the tripped state in 23 ℃ still air environment
Imax
The highest fault current that can safely be used to trip a Poly Switch device under specified conditions.
Rmin
Maximum device resistance under specified conditions measured 1 hour post trip or post reflow.
Pdmax
Maximum device resistance under specified conditions as supplied.
Rmax
Minimum device resistance under specified conditions as supplied.
刘
特价供应佳乐固态继电器附件RHS45CD
特价供应佳乐固态继电器附件RHS45C
特价供应佳乐固态继电器附件RHS90A
大量供应JUC-31F常开型家用电器温控器
供应商:刘
深圳市南村电子科技有限公司
请供应商联系我
联系方式暂未开放